Omron NC1-510000, User Manual

Page: 21 / 188

STP cables must be used for connection to host computer and/or peripherals in order to meet FCC
and IC emission limits. In according with 47 CFR Part15.407(e) U-Nll devices operating in
5.15-5.25GHz frequency bands are restricted to indoor operations only. This transmitter must not be
co-located or operated in conjunction with any other antenna or transmitter. This equipment complies
with FCC and IC radiation exposure limits set forth for uncontrolledequipment and meets the FCC and
IC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be
installed and operated with at least 20cm and more between the radiator and person's body (excluding
extremities: hands, wrists, feet and legs). This device has been designed to operate with an antenna
having a maximum gain of 7 dBi (5 GHz)/ 4.5 dBi (2.4 GHz). Antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To re-
duce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
Power Supply Design and Turning ON/OFF the Power Supply
• Always use a power supply that provides power within the rated range.
• Do not perform a dielectric strength test.
• Always use the recommended uninterruptible power supply (UPS) to prevent data loss and other
system file integrity issues caused by unexpected power interruption. Back up the system files in the
planned way to prevent data loss and other system file integrity issues caused by incorrect opera-
tion.
• Use an Omron S8BA UPS with the correct revision number to prevent improper system shutdown.
• Power ON after connecting the product and an external monitor.
• Always check the power supply and power connections before applying power. Incorrect power con-
nections can damage the product or cause burning.
• Always turn OFF the power supply to system before you attempt any of the following.
• Inserting or removing PCIe Cards
• Connecting cables
• Connecting or disconnecting the connectors
• Wiring the system
• Replacing or removing the HDD/SSD
• Replacing the Battery
• Replacing the Fan Unit
Actual Operation
• Choose a OS password that is not obvious to prevent unauthorized access.
• Remember the OS user name and password. The product is inaccessible without it.
• Before operating the system , please make sure the appropriate software is installed and config-
ured. Doing so may prevent unexpected operation.
• Install all updates and ensure the browser stays up-to-date.
• Install all updates and ensure the firewall stays up-to-date.
• Make sure that your OS environment is protected against malicious software and viruses.
• Install all updates and ensure virus definitions stay up-to-date.
• Do not remove the fan cover while the power is ON. Contact with a rotating fan may result in injury.
Precautions for Safe Use
19
AMR Controller User's Guide (I650)