Omron NC1-510000, User Manual

Page: 106 / 188

5-3-3
Temperature
The temperature inside a control panel may be at least 10 to 15°C higher than outside the panel. Im-
plement the following measures against overheating at the installation site and in the control panel,
and allow a sufficient margin for the temperature.
Distance for Cooling with a Custom Bracket
A minimum distance for cooling is not specified for the AMR Controller.
The hotspot heatsink temperature must be within the specified operating range.
Refer to
4-3-2 Temperature and Humidity Specifications on page 4-32 for details.
Additional Information
Allow space to accommodate for the bending radius of the cables.
• Refer to
3-10 Optional Hardware on page 3-24 for cable bending requirements of cables ad-
vised by Omron.
• Refer to the cable specifications of the supplier for all other cables.
Distance for Cooling for Book Mount and Wall Mount
Adequate airflow around the AMR Controller is required.
Additional Information
• The ambient temperature must be within the operating range.
Refer to 4-3-1 Operation Environment Specifications on page 4-31 for temperature specifica-
tions.
• Allow space to accommodate for the bending radius of the cables.
• Refer to 3-10 Optional Hardware on page 3-24 for cable bending requirements of cables
advised by Omron.
• Refer to the cable specifications of the supplier for all other cables.
Provide enough space for good air flow and ensure the following minimum distances are observed
around the sides of the AMR Controller.
•
Book Mount
Z X X
Y
Y
5 Installation
5-8
AMR Controller User's Guide (I650)