Omron NC1-510000, User Manual

Page: 135 / 188

5-6 Initial Power ON
This section describes how to Power ON the AMR Controller for the first time.
WARNING
Ensure that installation and post-installation checks of the product are performed by
personnel in charge who possess a thorough understanding of the machinery to be
installed.
5-6-1 Initial Power ON Procedure
Use the following procedure to power ON the AMR Controller for the first time.
1
Ensure the following conditions are present before applying power for the first time:
• The AMR Controller is securely fastened to the mounting surface.
• The AMR Controller is connected to ground.
• All connectors are securely fastened.
2
Ensure that the connected monitor(s) is powered ON.
3
Connect a keyboard and/or a mouse.
Additional Information
• If using an OMRON Industrial Monitor this may not be required because it has touch function-
ality.
• Do not connect additional storage devices before the installation of the operating system
completed. Adding storage devices like a USB flash drive, an SD memory card or a PCIe
card might influence the default drive letter sequence.
4
Ensure the power supply is ON.
Precautions for Safe Use
Always check the power supply and power connections before applying power.
Incorrect power connections can damage the product or cause burning.
Additional Information
If a drive with a windows operating system is installed a system backup of the factory state can
be created. To create this system backup download and use the Rescue Disk Creator.
Refer to the OMRON website for download details.
5
Press the power button and release within 1 second.
Refer to
3-4 Power Button on page 3-11 for the power button location.
The AMR Controller starts and the PWR LED will go ON.
5 Installation
5-37
AMR Controller User's Guide (I650)
5-6 Initial Power ON
5
5-6-1
Initial Power ON Procedure