Omron NC1-510000, User Manual

Page: 125 / 188

7
B A
C
Mount the ground connection wire
B
to the functional ground terminal
A
using the washers and nut
C
. Tighten the nut with a torque of 1.2 N·m max.
Refer to 5-3-9 Wall Mount Procedure on page 5-19 for wall mounting details.

Crimp terminals
Use crimp terminals with dimensions X = M4 and Y = 8 mm max.
Y X Y X
5-4-3 Wire the Power Connector
This section describes how to wire the power connector.
Precautions for Safe Use
• Do not perform a dielectric strength test.
• Always use the recommended uninterruptible power supply (UPS) to prevent data loss and
other system file integrity issues caused by unexpected power interruption. Back up the sys-
tem files in the planned way to prevent data loss and other system file integrity issues caused
by incorrect operation.
5 Installation
5-27
AMR Controller User's Guide (I650)
5-4
W
ire
5
5-4-3
Wire the Power Connector