Omron NC1-510000 User Manual Download Page 20

Page: 20 / 188

• Always ensure the wireless connectors are completely locked in place to prevent accidental discon-

nection.

• Use crimp terminals for wiring.
• For an NY Monitor Link connection, always follow the cable type and connection method specifica-

tions in the manual. Otherwise, communications may be faulty.

• The Radio Law prohibits outdoor use of wireless LAN in IEEE802.11a standard (5GHz band).
• Do not use it close to a person with a cardiac pacemaker. Electromagnetic interference may affect it,

putting his/her life at risk.

• Do not use it close to medical equipment. Electromagnetic interference may affect the cardiac pace-

maker to cause loss of human life.

• Do not use it close to an electric oven. Electromagnetic interference may affect the medical equip-

ment to cause loss of human life.

• Radio device in this product has been certified by the Radio Law. Do not disassemble or modify this

product.

Caution for Radio Interference with 2.4GHz Wireless LAN
Take the following precautions for communication by 2.4GHz (IEEE802.11b/g) wireless LAN.
Within this product's frequency range, industrial, scientific, and medical equipment, such as electric
oven, as well as RFID premises radio stations (license required) and specified low power radio station
and ham radio station (license not required) used in factory manufacturing lines are operated.
• Before using this device, confirm that no RFID premises radio station, specified low power radio sta-

tion, or ham radio station is operating close to it.

• If this product caused radio interference with an RFID premises radio station, immediately change

the product's frequency or stop radio emission, and contact OMRON representative for actions to
take to prevent cross talk.

FCC/IC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. In addition, users should also be cautioned to take note
that high-power radars are allocated as primary users (meaning they have priority) of the bands
5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to
LE-LAN devices.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules and RSS-Gen of IC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connect-