3
-2
Digital Operator
This section describes the displays and functions of the Digital Operator.The key names and functions of
the Digital Operator are described below.
Fig 3.1 Digital Operator Component Names and Functions
FWD:
Lit when there is a forward run command
input.
REV:
Lit when there is a reverse run command
input.
SEQ:
Lit when the run command from the control
circuit terminal is enabled.
REF:
Lit when the frequency reference from control
circuit terminals A1 and A2 is enabled.
ALARM: Lit when an error or alarm has occurred.
Displays monitor data, parameter numbers and
settings.
DRIVE:
Lit in Drive Mode.
QUICK: Lit in Quick Programming Mode.
ADV:
Lit in Advanced Programming Mode.
VERIFY: Lit in Verify Mode.
AUTO : Lit in Autotuning Mode.
TUNING
Keys
Execute operations such as setting user parame-
ters, monitoring, jogging and autotuning.
Drive Mode Indicators
Data Display
Mode Display
Digital Operator with LED Display (3G3IV-PJVOP161)
Drive Mode Indicators
Data Display
FWD:Lit when there is a forward run command
input.
REV: Lit when there is a reverse run command
input.
SEQ:Lit when the run command from the control
circuit terminal is enabled.
REF:Lit when the frequency reference from control
circuit terminals A1 and A2 is enabled.
ALARM:Lit when an error or alarm has occurred.
Displays monitor data, parameter numbers and
settings.
Keys
Execute operations such as setting user parame-
ters, monitoring, jogging and autotuning.
Digital Operator with LCD Display (3G3IV-PJVOP160)
