5
-38
U1-11
Output termi-
nal status
Shows output ON/OFF status.
(Cannot be output.)
-
A
4AH
Output Term
Sts
U1-12
Operation sta-
tus
Inverter operating status.
(Cannot be output.)
-
A
4BH
Int Ctl Sts 1
U1-13
Cumulative
operation time
Monitors the total operating time
of the Inverter.
The initial value and the operat-
ing time/power ON time selection
can be set in o2-07 and o2-08.
(Cannot be output.)
0
hr
A
4CH
Elapsed Time
U1-14
Software No.
(flash mem-
ory)
(Manufacturer’s ID number)
(Cannot be output.)
-
A
4DH
FLASH ID
U1-15
Terminal A1
input voltage
Monitors the input voltage of the
voltage frequency reference. An
input of 10 V corresponds to
100%.
10 V: 100% (10 V)
(0 to + 10 V possible)
0.0%
A
4EH
Term A1 Level
U1-16
Terminal A2
input voltage
Monitors the input voltage of the
multi-function analog input.
An input of 10 V corresponds to
100%.
10 V: 100% (10 V)
(0 to +10 V possible)
0.0%
A
4FH
Term A2 Level
U1-18
Motor second-
ary current
(Iq)
Monitors the calculated value of
the motor secondary current.
The motor rated secondary cur-
rent corresponds to 100%.
10 V:Motor rated secon-
dary current)
(0 to +10 V output)
0.0%
A
51H
Mot Sec Cur-
rent
U1-20
Output fre-
quency after
soft-starter
(SFS output)
Monitors the output frequency
after the soft starter.
The frequency given does not
include compensations.
The unit is set in o1-03.
10 V: Max. frequency
(0 to + 10 V possible)
0.00
Hz
A
53H
SFS Output
Param-
eter-
Number
Name
Description
Output Signal Level During Multi-
Function Analog Output
Min.
Unit
Access
Level
RS-422A/
485
Register
LCD
Display
1: Multi-function
contact output 1
(M1-M2) is ON
1: Multi-function
contact output 2
(M3-M4) is ON
Not used
(Always 0)
Not used
(Always 0).
1: Error output
(MA/AB-MC) is
ON
Run
1: Zero speed
1: everse
1: Reset signal
input
1: Speed agree
1: Inverter ready
1: Minor fault
1: Major fault
