Modes
3
-
11
Verify Mode
Verify mode is used to display any parameters that have been changed from their default settings in a pro-
gramming mode or by autotuning. “None” will be displayed if no settings have been changed.
Even in verify mode, the same procedures can be used to change settings as they are used in the programming
modes. Use the Increment, Decrement and Digit Selection/RESET keys to change the frequency. The user
parameter will be written and the monitor display will be returned to when the ENTER key is pressed after
changing the setting.
Example Operations
An example of key operations is given below for when the following settings have been changed from their
default settings: b1-01 (Reference Selection), C1-01 (Acceleration Time 1), E1-01 (Input Voltage Setting) and
E2-01 (Motor Rated Current).
Fig 3.7 Operations in Verify Mode
Mode Selection Display
Monitor Display
Setting Display
Verify Mode
Frequency reference
selection
Acceleration time 1
Input voltage setting
Motor rated current
Frequency reference
selection
Acceleration time 1
Input voltage setting
Motor rated current