9
-8
* 1. Recommended Options can be ordered from OMRON using the above model numbers.
Table 9.1 Options and Peripheral Devices
Type
Name
Model number
Application
Special Mounted
Options
Fan Unit
3G3IV-PFAN
Replacement fan for Inverters equipped with a cooling fan.
Replace the Cooling Fan when the fan replacement time has come or a cooling fan fault
(FAN) alarm has been displayed.
Separately
Installed Options
Scaling Meter
K3TJ-V11
Connects to a multi-function analog output from the Inverter.
Used to display rotational speeds of motors, line speeds, etc., in physical units.
Analog Operator (stan-
dard with steel panels)
3G3IV-PJVOP96
Allows frequency reference settings and ON/OFF operation control to be performed by
analog references from a remote location (50 m max.).
Frequency counter specifications: 75 Hz, 150 Hz, 220 Hz
Analog Operator (small,
plastic)
3G3IV-PJVOP95
Allows frequency reference settings and ON/OFF operation control to be performed by
analog references from a remote location (50 m max.).
Frequency counter specifications: 60/120 Hz, 90/180Hz
Special Options
Braking Unit
3G3IV-PCDBR
B
Used with a Braking Resistor Unit to reduce the deceleration time of the motor.
Not required with Inverters of 7.5 kW or less for 200-V class Inverters or for Inverters of
15 kW or less for 400-V class Inverters.
Braking Resistor Unit
3G3IV-PLKEB
Consumes the regenerative motor energy with a resistor to reduce deceleration time (use
rate: 10% ED).
DC Reactor
3G3HV-PUZDAB
Used to control harmonics generated by the Inverter and to improve the input power fac-
tor of the Inverter. All Inverters of 18.5 kW or higher contain built-in DC reactors.
Digital Operator with
LCD Display
3G3IV-PJVOP160
Displays messages on a LCD.
Digital Operator with
LED Display
3G3IV-PJVOP161
Display messages on a LED display. Standard in Asia and Europe.
Digital Operator Connec-
tion Cable
3G3IV-PCN126 (1 m)
Extension cable to use a 3G3PV-series Digital Operator remotely.
Cable length: 1 m or 3 m
3G3IV-PCN326-E (3 m)
Personal Computer cable
3G3IV-PCN329-E
Connection cable for connecting the 3G3PV series Inverter to the SYSDrive configura-
tor (software tool) on Personal Computer.
Option cards
DeviceNet Communica-
tions Card
3G3FV-PDRT1-SIN
Used for DeviceNet communications with a Programmable Controller or other
DeviceNet master device.
7HUPLQDO FDUGV
Standard terminal card
3G3PV-PETC618140
Standard terminal card for standard operation
Optional terminal card
3G3PV-PETC618120
Optional terminal card (with shunt connector CN15) for switching the analog output
levels between (0-10V) or (4 to 20 mA).
Recommended
Separately
Installed
Options
*1
AC Reactor
3G3IV-PUZBAB
Used to control harmonics generated by the Inverter or when the power supply capacity
is greatly larger than the Inverter’s capacity. Also used to increase the power factor.
Simple Input Noise Filter
3G3EV-PLNFD
Reduces noise coming into the inverter from the power supply line and to reduce noise
flowing from the inverter into the power supply line. Connected to the power supply
input side.
Input Noise Filter
(Schaffner)
3G3IV-PFN
Reduces noise coming into the inverter from the power supply line and to reduce noise
flowing from the inverter into the power supply line.Connected to the power supply
input side.
Input Noise Filter
(Schaffner) for EMC
Directive
3G3RV-PFI
-SE
Required for the 3G3PV Inverter to meet the EMC Directive.
Input Noise Filter
(Rasmi) for EMC Direc-
tive
3G3RV-PFI
-E
Required for the 3G3PV Inverter to meet the EMC Directive.
Output Noise Filter
(Tokin)
3G3IV-PLF
Controls noise generated by the Inverter so it does not enter the power supply. Con-
nected to the motor output side.
