Omron F160 Vision Sensor, Operation Manual, Page: 76 / 148

67
Changing and Clearing Inspection Conditions
Section 4-1
If Yes is Selected
Return to STEP 2: Registering Reference Images and re-register the im-
ages. (The stored reference images are not cleared.)
If No is Selected, go to 4-1-2 Re-registering Reference Images.
4-1-2 Re-registering Reference Images
Select Yes to update the reference images. The reference images will be reg-
istered using the same procedure as the first time.
SeeAlso
Refer to page 22 STEP 2: Registering Reference Images.
If you want to keep the previous reference image, select No.
CHECK
When the Power Has Been Turned OFF After Previous Inspection Conditions
Were Set
The reference images will have been cleared. Either place a workpiece of the
same size in the same position and register that image or, if the reference
image was backed up to a computer or Memory Card, download the image as
memory image 35. (Refer to page 81 and page 85.)
CHECK
If you have downloaded backed up images, select STEP as the image storage
method and select memory image 35. (Refer to page 22.)
4-1-3 Changing Setting Details
Adding Regions
Yes Back
No
This scene has been
set already. Clear
all settings and
reset entire scene?
0.Scn 0 =SET= Ref image
Yes Back
No
Change reference
image?
The previous refer-
ence image has not
been cleared.
Select
Add.
Add the region using the same procedure
as
STEP 3: Selecting and Setting Inspection Types.
STEP
3
1.