Omron F160 Vision Sensor, Operation Manual, Page: 84 / 148

75
Changing Scenes and Scene Groups
Section 4-2
1. Move the cursor to Scn 0 and press the ENT Key.
2. Move the cursor to the scene number to which data is to be copied.
3. Press the SHIFT+ESC Keys.
The Copy/Clear/Comment Menu will be displayed.
4. Select Copy.
The screen for copying will be displayed.
5. Enter the number of the scene from which data is to be copied (Original
scene), and select Execute.
The data will be copied.
4-2-3 Initializing Measurement Conditions: Clearing Scenes
Use the following procedure to clear measurement conditions set in Set Mode,
and to return scenes to their default settings. This section explains the proce-
dure performed separately for each scene.
SeeAlso
Refer to page 77 for information on initializing whole scene groups.
1. Move the cursor to Scn 0 and press the ENT Key.
2. Move the cursor to the number of the scene to be cleared.
3. Press the SHIFT+ESC Keys.
The Copy/Clear/Comment Menu will be displayed.
S+ENT:Help S+
→
:Adjust
S_ESC:Set disp
S+ESC:Edit S+ENT:Scn Group
Freeze
---- ---ms
0.Scn 0
1.Scn 1
2.Scn 2
3.Scn 3
4.Scn 4
5.Scn 5
6.Scn 6
7.Scn 7
↑ ↓
0.Scn 0 MON
Copy
Clear
Comment
Execute Cancel
Original scene: 0.Scn 0
S+ENT:HElp S+
→
:Adjust
S+ESC:Set disp
S+ESC:Edit S+ENT:Scn Group
Freeze
---- ---ms
0.Scn 0
1.Scn 1
2.Scn 2
3.Scn 3
4.Scn 4
5.Scn 5
6.Scn 6
7.Scn 7
↑ ↓
0.Scn 0 MON
Copy
Clear
Comment