Omron F160 Vision Sensor, Operation Manual, Page: 42 / 148

33
Understanding Setting Operations
Section 2-3
2-3-4-2 Changing Position Displacement Compensation Regions
1. Enclose with a rectangle two places to use for position compensation.
Up/Down and Left/Right Keys: Move the arrow cursor.
SHIFT + Up/Down and Left/Right Keys: Move the arrow cursor quickly.
ENT Key: Sets the position.
The screen for setting the movement range will be displayed.
2. Specify each movement range.
The F160 will find the part in this movement range that most resembles the
registered mark and finds the workpiece based on that position.
Go to 1-3-4-3.
2-3-4-3 Objects at an Angle
1. Check on the Monitor and select Yes for objects that require angle com-
pensation.
↑ ↓←→
: Move ENT:Set ESC: Back
0.Scn 0 =SET= Position
Enclose mark, hole,
corner, etc., that will be on
every workpiece (2 positions)
360,360
↑ ↓←→
: Move ENT:Set ESC: Back
0.Scn 0 =SET= Position
Set movement range
for this part.
(2nd position)
424,424
No Back Yes
Is target at an angle?
0.Scn 0 =SET= Position
S+
←→
:Switch display