Omron F160 Vision Sensor, Operation Manual, Page: 122 / 148

113
Setting Conditions for Saving Measurement Images
Section 5-5
The Measurement Control Settings Screen will be displayed.
2. Change the conditions under Image storage.
3. Select End.
The settings will be recorded and the System Mode Screen will return.
5-5-1 Displaying Stored Images
By displaying a stored image on the screen, the reason for a previous NG
judgement can be checked. Also, measurement can be re-performed on the
stored image with different evaluation criteria.
The current image is displayed in the lower-right corner of the screen.
End
Measurement control
Image storage
STEP in measure
BUSY range
Reflect position
Reflect region
Reflect variable
Reflect judge :
:
:
:
:
:
:
None
ERR ON
ON
OFF
ON
None
Only NG
All
Freeze
---- ---ms 0.Scn 0 MON ---- ---ms 0.Scn 0 MON
Note: Current image status (See note 1.)
The NG image saved 2 before the last image.
Memory number the displayed
image is stored under.
Last 2 (Mem 3)
When saved images are displayed (See note 2.)
STEP/TRG:Msr S+
↑ ↓
:Mem img
S+ENT:Help S+
→
:Adjust
S+ESC:Set disp
STEP/TRG:Msr S+
↑ ↓
:Mem img
S+ENT:Help S+
→
:Adjust
S+ESC:Set disp