Omron F160 Vision Sensor, Operation Manual, Page: 75 / 148

66
Changing and Clearing Inspection Conditions
Section 4-1
4-1 Changing and Clearing Inspection Conditions
To change, add, or delete inspection area positions, enter Set Mode again and
change the conditions.
You can also clear all settings and start again. The reference images will
remain, however, unless the power is turned OFF or the images are overwrit-
ten using the save function. Decide whether to register other images or use
the existing reference images.
4-1-1 Entering Set Mode
1. Move the cursor to MON and press the ENT Key once.
A list of selections will be displayed.
2. Select SET.
The Start Screen for Conversational Menus will be displayed.
3. Select Start.
The screen for selecting whether or not to clear all settings will be dis-
played.
Enter
Set Mode.
1
Refer to page 22.
STEP 2
Start again from Reference Image.
To change
reference
images
To clear
reference images
Register
different
images.
2
Change
setting details.
3
Change position
displacement
compensation.
4
OK 63ms
0.Scn 0 MON
OK 63ms
0.Scn 0 MON
MON
RUN
SYS
TOOL
SAVE
SET
Start setting?
Cancel Start