Omron F160 Vision Sensor, Operation Manual, Page: 118 / 148

109
Customizing Operations
Section 5-4
Display Capture Results
When display capture is executed, a directory called IMAGE will automatically
be created in the root directory of the Memory Card and the following two
types of files will be stored in that directory.
5-4-2 Shortening Scene Group Switching Time
Normally, settings data is saved to flash memory and the Memory Card when
scene groups are changed. The time taken to save is, therefore, added to the
time taken to change scene groups. The time to change scene for changes in
measurement setups can be reduced by omitting the save process.
Precaution
If this function is set to OFF and settings data changed, always save the data
before changing scene groups. When scene groups are changed, data from
the flash memory or the Memory Card is loaded. So if the changed settings
data is not saved, the data will be replaced by the loaded data. Refer to
page 86.
1. Enter System mode and select Operation settings.
SeeAlso
Refer to page 102.
The Menu will be displayed.
2. Select Save at switch Scn Group.
LIVE
∗∗∗
.BMP
Density images with 256 graduations will
be saved in bitmap format. These images
can be loaded to the F160 and re-
measured. (Binary images will also be
saved in bitmap format.)
The displayed image will be saved in a
bitmap. (The image will only have 192
graduations.)
Only this file will be saved if the image was
captured while in Set, System, or Tool
modes.
Freeze
OK 67ms
0.Scn 0 MON
Freeze
OK 67ms
0.Scn 0 MON
CAPT
∗∗∗
.BMP
Captured display
A serial number starting from 000 will be automatically allocated to
∗∗∗
.
The same number is used for both files.
STEP/TRG:Msr S+
↑ ↓
:Mem img
STEP/TRG:Msr S+
↑ ↓
:Mem img
OK
OK
Set key operation
Display capture
Setting menu masking
Processing item masking
Save at switch Scn Group
Password