Omron F160 Vision Sensor, Operation Manual, Page: 111 / 148

102
Entering System Mode
Section 5-1
5-1 Entering System Mode
To set conditions related to the system environment it is necessary to enter
System Mode.
1. Display the Basic Screen for Monitor Mode or Run Mode.
2. Move the cursor to MON and press the ENT Key.
The mode selections will be displayed.
3. Select SYS.
The System Settings Screen will be displayed.
CHECK
The Output selection cannot be used in the Conversational Menus.
5-2 Camera Settings
Specify the model of the connected Camera and Intelligent Lighting (if using
any). The model is written on each Unit.
Freeze
---- ---ms
0.Scn 0 MON
STEP/TRG:Msr S+
↑ ↓
:Mem img
S+ENT:Help S+
→
:Adjust
S+ESC:Set disp
---- ---ms 0.Scn 0 MON
SET
MON
RUN
SYS
TOOL
SAVE
System settings
Camera settings
Communications
Output
Display
Operation settings
Measurement control
Switch menu
Startup mode
↑ ↓
Menu item Models Details
Camera F150-S1A
F160-S1*
Other
Select the model of the connected Camera.