Omron F160 Vision Sensor, Operation Manual, Page: 126 / 148

117
Selecting Items to be Shown in Overall Judgements
Section 5-7
The Measurement Control Settings Screen will be displayed.
2. Change the STEP in measure and BUSY range settings.
3. Select End.
The settings are registered and the System Mode Screen will return.
5-7 Selecting Items to be Shown in Overall Judgements
Select which of the following two items will be shown in the overall judgement
output to the OR signal of the parallel interface.
• Position compensation judgement result
• Judgement result for each region
CHECK
The overall judgement is displayed at the top of the Monitor and Run Mode
screens.
1. Enter System mode and select Measurement control.
SeeAlso
Refer to page 102.
The Measurement Control Settings Screen will be displayed.
2. Change the settings.
End
Measurement control
Image storage
STEP in measure
BUSY range
Reflect position
Reflect region
Reflect variable
Reflect judge :
:
:
:
:
:
:
None
ERR ON
Measurement
ON
ON
OFF
ON
Freeze
OK 100ms 0.Scn 0 MON
STEP/TRG:Msr S+
↑ ↓
:Mem img
S+ENT:Help S+
→
:Adjust
S+ESC:Set disp
End
Measurement control
Image storage
STEP in measure
BUSY range
Reflect position
Reflect region
Reflect variable
Reflect judge :
:
:
:
:
:
: None
ERR ON
Measurement
ON
ON
OFF
OFF
×
×
×
: Cannot be used with the Conversational Menus