Omron F160 Vision Sensor, Operation Manual, Page: 30 / 148

21
Understanding Setting Operations
Section 2-3
2-3 Understanding Setting Operations
This section uses a simple example to explain the procedures for using Con-
versational Menus, from setting inspection conditions through to starting
inspection. The example used is a presence inspection. The operating guides
displayed on the screen can be used just like a conversation to help perform
procedures.
2-3-1 STEP 1: Starting Conversational Menus
1. The screen shown below will be displayed when the Conversational
Menus are started for the first time.
2. Move the cursor to MON and press the ENT Key.
A list of modes will be displayed.
3. Use the Up and Down Keys to move the cursor and select SET.
The F160 will enter Set Mode.
4. Select Start to start making the settings.
Follow the instructions given by the operation guide displayed on the
screen for the rest of the procedure.
S+
↑ ↓
:Mem img
Freeze
---- ---ms
0.Scn 0 MON
For a new scene,
press ENT at MON and
then select SET from
the menu.
---- ---ms
0.Scn 0 MON
SET
MON
RUN
SYS
TOOL
SAVE
SET
Start setting?
Cancel Start