Omron F160 Vision Sensor, Operation Manual, Page: 43 / 148

34
Understanding Setting Operations
Section 2-3
If angle compensation is not required, select No and go to 1-3-4-4.
The screen for selecting the angle range will be displayed.
2. Select the angle range for the object.
The larger the angle range, the longer the time required for measurement.
3. Select OK.
Go to 1-3-4-4.
2-3-4-4 Finishing Settings
1. A message prompting a switch to Monitor Mode will be displayed. Select
Yes.
You will enter Monitor Mode. Perform a test to see if correct inspections will
occur.
Angle range selections
–
5
•
–
15
•
–
30
•
–
45
•
–
90
•
360
•
Compensation is not required
if the object is not at an angle.
A rotation range must be
set for objects at an angle.
0.Scn 0 =SET= Position
OK Back
Angle :
±
5
°
Appoint the angle range of
the target's leaning.
Start
Ref image
Region
Position
End
>>
0.Scn 0 =SET= End
•
Save before turning OFF power
•
Change to Run Mode to
output results.
Back Yes
Settings finished.
Switching to Monitor
Mode.
STEP
5