Omron F160 Vision Sensor, Operation Manual, Page: 68 / 148

59
Dimension
Section 3-4
If Yes is Selected
Set the range for OK items in physical units. Go to step (2.)
If No is Selected
Set the range for OK items in pixel units. Go to step (5.)
The following explanation of how to align the coordinate scale with the di-
mensions of the workpiece will use a workpiece on an angle as an exam-
ple.
2. Align the origin of the coordinates (O) with the left corner or other part of
the workpiece that will serve as the origin for the physical units.
Up/Down and Left/Right Keys: Move the origin (O).
SHIFT + Up/Down or Left/Right Keys: Move the origin quickly.
ENT Key: Sets the position.
The screen for aligning the coordinate axis will be displayed.
3. If the workpiece is on an angle, use the Down/Right and Up/Left Keys to
specify the angle for the axis.
Down and Right Keys: Rotates the axis in the clockwise direction.
20 mm
230 pixels
0.Scn 0 =SET= Region
100.0
X
Y -100.0
-100.0
100.0
X = 155
Y = 326
↑ ↓←→
:Change ENT:Set ESC:Back
Set coordinates
Set the position
of the origin.
O
0.Scn 0 =SET= Region
X
θ=
10.0
↑ ↓←→
:Change ENT:Set ESC:Back
Set coordinates
Set the angle of
coordinate axis.
100.0
Y
-100.0
-100.0
100.0
O