![background image](http://html1.mh-extra.com/html/omron/f160-vision-sensor/f160-vision-sensor_operation-manual_741258065.webp)
56
Position
Section 3-3
If Yes was selected in step (6.), the screen for specifying the reference po-
sition will be displayed.
7.
Use the Up/Down and Left/Right Keys to move the cursor to the refer-
ence position.
SHIFT + Up/Down or Left/Right Keys: Move the cursor quickly.
SHIFT + ESC Keys: Used to correct the position. Returns to the
screen for aligning the coordinate axis.
ENT: Sets the position.
The screen for changing the range for OK items will be displayed.
SeeAlso
Refer to page 19 for details on inputting values.
8.
Move the cursor to the value to be changed and set the range for OK items.
Go to step (10.)
0.Scn 0 =SET= Region
S+ESC:Adjust coordinates
↑
↓←→
: Move ENT:Set ESC: Back
0.Position(Ref )
Set reference
position.
X= 239.881
Y= 157.342
Dist= 286.821
Coordinates with the origin as the specified
reference position and the distance from the origin.
Width X
Reference position
Width Y
Distance
0.Scn 0 =SET= Region
End
Back
X : [ 237.000: 241.000]
Y : [ 155.000: 159.000]
Dist : [ 284.000: 288.000]
0.Position(Ref )
Set the range
for OK items.
Range for OK items automatically calculated
by the F160 based on the coordinates.
X= 239.881
Y= 157.342
Dist= 286.821
Summary of Contents for F160 Vision Sensor
