Omron F160 Vision Sensor, Operation Manual, Page: 121 / 148

112
Setting Conditions for Saving Measurement Images
Section 5-5
CHECK
Forgotten Passwords
The password can be checked by inputting a password confirmation com-
mand (page 111) (normal PASSWORD command) from the serial inter-
face. Refer to the Communications Reference Manual.
Note The only normal command that can be used with the Conversational
Menus is the PASSWORD command. No other normal commands
are supported.
5-5 Setting Conditions for Saving Measurement Images
The F160 can save up to 35 measured images. These 35 scenes are shared
by 32 scenes. The condition for saving the images can be selected from sav-
ing only when the measurement result is NG or saving all images regardless
of the measurement result.
Precaution
Stored images will be cleared when the power is turned OFF. Images to be
kept must be backed up to a personal computer or Memory Card. Refer to
page 78.
1. Enter System mode and select Measurement control.
SeeAlso
Refer to page 102.
OK
Last
measurement
object
Previous 1 Previous 2 Previous 3
Previous Previous 1 Previous 2 Previous 3
When only NG images
are set to be saved.
When all images are
set to be saved.
NG NG OK
Saved images
Production line
Previous Previous 1