Omron F160 Vision Sensor, Operation Manual, Page: 69 / 148

60
Dimension
Section 3-4
Up and Left Keys: Rotates the axis in the anti-clockwise direction.
SHIFT + Down/Right or Up/Left Keys: Rotates the axis quickly.
ENT Key: Sets the position.
The screen for setting the magnification will be displayed.
4. Use the Down/Right and Up/Left Keys to enlarge and reduce the coordi-
nate scale and align with the physical dimensions of the workpiece.
Up/Left Keys: Enlarge the scale.
Down/Right Keys: Reduce the scale.
SHIFT + Down/Right or Up/Left: Reduces or enlarges the scale quick-
ly.
ENT Key: Sets the magnification.
The screen for specifying the inspection start position will be displayed.
5. Use the Up/Down and Left/Right Keys to move the cursor to the position
to be inspected. This specifies the start position (1st position).
SHIFT + Up/Down or Left/Right Keys: Move the cursor quickly.
SHIFT + ESC Keys: Used to correct the position. Returns to the
screen for aligning the coordinate axis.
ENT: Sets the position.
0.Scn 0 =SET= Region
X
Zoom= 0.087
Sight=49.023
↑ ↓←→
:Change ENT:Set ESC:Back
Set coordinates
Set the
magnification.
10.0
Y
-10.0
-10.0
10.0
O
Example: 20 mm Workpiece
Align the origin with the bottom left corner of the
workpiece and enlarge or reduce the scale to match
20.0 on the scale with the bottom right corner of the workpiece.
20 mm
0.Scn 0 =SET= Region
S+ESC:Adjust coordinates
↑ ↓←→
: Move ENT:Set ESC: Back
0.Dimens'n
Specify the 1st
position.
X=182.712
Y=200.426