background image

18

Menu Operations

Section 2-2

2-2-3

Drawing Figures

This section describes how to draw figures used to specify the region to be
inspected.

Move the cursor with the Up, Down, Left and Right Keys. Use together with
the SHIFT Key to move the cursor quickly. Press the ENT Key at the desired
positions and press the ESC Key to undo the setting.

Measure-

ment item

Figures 

that can be 

drawn

Drawing method

Presence

Conformity

Orientation

Surface (for 
boxes only)

Box

Ellipse

Circle

Circumfer-
ence

Polygon

The whole 
region moves.

The lower right 

coordinates move.

The figure is set.

ENT

ENT

ESC

The whole 
region moves.

The lower right 

coordinates move.

The figure is set.

ENT

ENT

ESC

The whole 
region moves.

The circumference 
changes.

The figure is set.

ENT

ENT

ESC

The whole 
region moves.

The circumference 
changes.

The width changes.

The figure is set.

ENT

ENT

ESC

ENT

ESC

Specify the 
first point.

Specify the 
second point.

Specify the third 
and other  points.

(Up to 10 points can 
be specified.)

The figure is set.

Press the 

ENT Key 

twice.

ENT

ENT

ESC

ENT

ESC

Summary of Contents for F160 Vision Sensor





















































































































































Reviews: