Omron F160 Vision Sensor, Operation Manual, Page: 125 / 148

116
Using BUSY Signals
Section 5-6
STEP in Measure
Measurement will not be performed by the F160 during another measurement,
even if the STEP signal turns ON. Set whether or not the ERR signal will turn
ON to notify the external device that the STEP signal was not accepted.
Note The default setting is marked with an asterisk.
BUSY Range
Select at what point in the F160 processing that the BUSY signal will turn OFF.
Note The default setting is marked with an asterisk.
1. Enter System mode and select Measurement control.
SeeAlso
Refer to page 102.
Selection Details
ERR ON (See note.) Measurement will not be performed and the ERR signal will
turn ON if the STEP signal turns ON during processing. The
ERR signal will turn OFF when the next STEP signal is input at
the correct timing.
OFF The ERR signal will not turn ON even if the STEP signal turns
ON during processing. Measurement will not be performed.
Selection Details
Image input completed The BUSY signal turns OFF when the image input has been completed. This can
be used as a guide as to whether or not the work piece can be moved.
When this selection is made, do not enter the next command until measurement
has been completed, even if the BUSY signal has turned OFF. If the next com-
mand is input before the measurement has been completed, the current process-
ing and the input command may not be executed correctly.
Measurement completed* The BUSY signal turns OFF when the measurement has been completed.
Display completed The BUSY signal turns OFF when the display of the measurement result has
been completed. The F160 remains busy until the display has been completed.
Image input Measurement Display
BUSY OFF
ON
STEP
Measuring
STEP
Image input Measurement
Display
BUSY OFF
ON
Measuring
STEP
Image input Measurement Display
BUSY OFF
ON
Measuring