Omron F160 Vision Sensor, Operation Manual, Page: 54 / 148

45
Saving Settings and Exiting the F160
Section 2-4
The mode selections will be displayed.
3. Select SAVE.
A confirmation message will be displayed.
4. Select Execute.
Precaution
Do not turn OFF the power or input a RESET signal while a message is
being displayed in any save or load operation. Data in memory will be de-
stroyed, and the F160 may not operate correctly the next time it is started.
Once the setting data has been saved, the screen in (1.) return.
5. Turn OFF the power to exit the F160.
CHECK
When Using the Scene Group Function
The scene data set to Scene Group 0 and the system data will be saved
to flash memory. The settings data for Scene Groups 1 to 31 will be over-
written to the Memory Card when this save operation is executed.
---- ---ms
0.Scn 0 MON
SET
MON
RUN
SYS
TOOL
SAVE
Setting data will be saved.
Execute Cancel