Omron F160 Vision Sensor, Operation Manual, Page: 95 / 148

86
Backing Up Data
Section 4-3
3. Select the desired number for scene group, scene, or image data.
CHECK
When backing up system and scene group data, the currently displayed
scene group will be loaded.
The screen for selecting files will be displayed.
4. Select the file to be loaded.
A confirmation message will be displayed.
5. Select Execute.
When the loading has been completed, the screen in (1.) will return.
4-3-3 Backing Up to Flash Memory
The scene data set to scene group 0 and system data will be saved to the
F160 internal flash memory. If this save operation is performed for scene
groups 1 to 31, the data will overwrite the contents of the files on the Memory
Card.
Precaution
Flash memory and Memory Card data is loaded each time the F160 is started
up. Therefore, when settings have been changed, be sure to save to flash
memory before turning the power OFF. If the power is turned OFF without sav-
ing, all of the setting changes will be lost.
Scn 0
Scn 1
Scn 2
Scn 3
Scn 4
Scn 5
Scn 6
Scn 7
↑ ↓
Scene No.
(0 to 31)
Memory 0
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
Memory 6
Memory 7
↑ ↓
Image data
No.
(0 to 35) (0 to 31)
Scn Group 0
Scn Group 1
Scn Group 2
Scn Group 3
Scn Group 4
Scn Group 5
Scn Group 6
Scn Group 7
↑ ↓
Scene group
No.
ENT:Select S+ESC:Edit
System data Load
/C0
[. ] 00/11/01
SYSDAT1 SYD 00/11/01
SYSDAT2 SYD 00/11/01
Example:
Screen for loading system data
Data will be saved.
SYSDAT1.SYD
↓
System data
Execute Cancel
Example:
Screen when loading system data