Omron F160 Vision Sensor, Operation Manual, Page: 90 / 148

81
Backing Up Data
Section 4-3
A screen showing the transfer progress will be displayed.
11. Select Transfer/Receive File from the Hyper Terminal menu on the com-
puter.
12. Specify where the file is to be saved.
13. Set the protocol to XMODEM or ZMODEM.
14. Select Receive. When using XMODEM, input a file name.
The data will be transferred from the F160 to the computer.
When the transfer has been completed, the screen in (8.) will return.
Loading Data from the Computer
1. Follow steps 1 to 3 in the above procedure to connect the F160 and the
computer.
SeeAlso
Refer to page 78.
2. Select Transfer/Send File from the Hyper Terminal menu.
3. Select the file to be sent.
4. Set the protocol to XMODEM or ZMODEM.
5. Select Send.
The data transfer screen will be displayed.
6. Once the preparations have been completed on the computer, display the
Basic Screen for Monitor Mode or Run Mode.
7. Move the cursor to MON (or RUN) and press the ENT Key.
Saving data.
System data Save
Computer
Data
F160
Freeze
---- ---ms 0.Scn 0 MON
STEP/TRG:Msr S+
↑ ↓
:Mem img
S+ENT:Help S+
→
:Adjust
S+ESC:Set disp