12. Appendix
12-13
How do I
Operation
Refer to
Configure an IP
address of EQ100
sub-LAN connection
port?
Change the factory
shipment IP address
"192,168,100,201" of
EQ100?
On EQ-Manager, select [EQ Project] -
[Network Setting] - [EQ100 Network
Setting](Sub-LAN) and configure an IP
address
This manual: "7.6.4.
EQ-Viewer User's Manual:
"4.6 Creating EQ100
Project"
Set up a password for
access to the Web UI
screen?
On EQ-Manager, select [Advanced
Setting] - [System Setting] to change
This manual: "7.6.6.
EQ-Viewer User's Manual:
"4.6 Creating EQ100
Project"
Add or change a
measurement device
and start collecting?
Collecting Stopped
On EQ-Manager, modify the EQ project
and write to EQ100
Add a new measurement device or
change the connection
Perform communication test
Start collecting
This manual: "7. EQ100
EQ-Viewer User's Manual:
"4.6 Creating EQ100
Project", "4.7 EQ100
Operations"
Add or change a
measurement device
newly supported by
EQ-Manager and start
collecting?
Update EQ-Manager and perform the
above steps
Taking Out EQ100 Collected Data
12.2.2.
How do I
Operation
Refer to
Write from an SD
card?
Configure the setup DIP switch SW7=ON on
the EQ100 front end, insert an SD card, and
reset or turn on the power
This manual: "7.9.2.
EQ-Viewer User's Manual:
"4.7 EQ100 Operations"
Write from a
computer?
Connect online from EQ-Manager, select
[Write Setting], or use the Web UI screen to
select [Update] - [Read EQ Project]
This manual: "7.9.2.
EQ-Viewer User's Manual:
"4.7 EQ100 Operations"