Omron EQ100-E User Manual Download Page 6

Page: 6 / 256

A lithium battery is used for memory backup. Do not disassemble, apply

pressure to deformation, overheat to more than 100

C, and/or burn it.

Otherwise serious injury may occasionally occur due to fire and/or explosion.

Injury and damage to objects may occur due to electrocution, fire and faults.

Do not place pieces of metal and wire debris into the product.

Electric shock may occur. Always make sure that the power is turned OFF

before wiring the terminal unit or replacing the battery.

Breakdown or explosion may occur.

Use a power supply of the specified voltage.

Electrocution, fire, or a fault may occur.

Do not disassemble, repair or modify the product.

WARNING

CAUTION

Summary of Contents for EQ100-E
































































































































































































































































Search results

Summary of Contents for EQ100-E

Reviews:

Related manuals for EQ100-E

Brands by name

Popular brands

Omron EQ100-E, User Manual

Search results

Summary of Contents for EQ100-E

Reviews:

Related manuals for EQ100-E

Brands by name

Popular brands