7. EQ100 Settings
7-22
<General-Purpose Input>
Setting Item
Description
Device Name
Enter a name of a device connected to the EQ100 general-purpose
input terminal.
Channel Name
Enter a channel name. If not entered, "device name"+"#"+"PULSE"
is automatically set.
Destination Group to
Add
If the [Destination Group to Add] check box is selected, channels
can be registered to a specified group at the same time.
To use this function, first register a group.
For registration, see "7.4.7. Group Registration".
Note that performing the registration without performing group
registration registers to a default "group".
* Setup values displayed in the [Add Channel] dialog box but not listed in the table above are
handled as fixed values. They cannot be operated.
Precautions for
Correct Use
- To convert a value measured in the general-purpose input terminal, create a free operation
channel in the operation channel setting. For details, see "7.4.5. Operation Channel Setting".
