1. Overview of EQ100
1-10
SD Card Output Function
1.4.2.3.
This function outputs collected data to an SD card. The collected data is outputted to an SD
card once a day.
In addition, operating on the Web UI screen or pressing the SD card save button outputs stored
data at the time of the operation without waiting for periodical output.
Reference
- The SD card output may take a long time from the operation to output to finish, depending on
the amount of data to save. Before ejecting the SD card, check the Web UI screen message
and/or buzzer sound for the completion of output.
- Upon the 1st SD card output after the setup, all data stored before then are outputted. If the
amounts of data that are not saved for a long time exist, output will take a long time to finish.
Maintenance Function
1.4.3.
■
Saving/Loading Settings
An EQ project created by EQ-Manager can be saved as a file in a computer. Loading the saved
EQ project to EQ100 can restore the settings.
■
Firmware Update Function
The EQ100 firmware can be updated by starting under the safe mode and using the Web UI
function. To reflect the change, the system must be restarted.
■
Setup Initialization
This function initializes all the settings back to the ones for factory shipment.
SD Card
EQ100
Collected
Data