7. EQ100 Settings
7-23
<Others (other than PLC/EQ-100 connected to General-Purpose Input terminals)>
Select the [Select] check box of the channel you want to register. The channels that have
been registered already are shaded with their check boxes being selected.
Setting Item
Description
Select
Select a channel you want to register for collecting.
Right-clicking shows the following menu, in which [Select], [Cancel],
and [Select the default channel] are available.
Channel Name
A channel name appears. To change, press the [Edit] button.
Channel Address A channel address appears.
Data Type
A channel type appears.
Edit
Clicking this displays a dialog box to change the channel name and
input parameter (only those available).
Destination Group
to Add
If the [Destination Group to Add] check box is selected, channels can
be registered to a specified group at the same time.
To use this function, first register a group.
For registration, see "7.4.7. Group Registration".
Note that performing the registration without performing group
registration registers to a default "group".
4) Clicking [OK] registers the channel with the specified configuration.
5) To add more channels, repeat the steps from 1) to 3).
Registered
Channel
Registered
Channel
