Omron CX-Programmer 9 Operation Manual Download Page 88

Page: 88 / 542

PART 1: CX-Programmer

CHAPTER 1 – Technical Specifications

OMRON

CX-Programmer _Page 8

Installing the CX-Programmer

1, 2, 3…

1. Insert the CX-Programmer installation disk (CD-ROM) into the CD-ROM drive.

2. The setup program will start automatically and the

Choose Setup Language

Dialog Box

will be displayed.

The language of the operating system running on the computer will be selected
automatically.

If the above dialog box is not displayed, double-click the CD-ROM driver from the
Explorer to display it.

Select the language to be installed and click

button. (See note.)

Note:

The following languages can be selected: English, Italian, Spanish,

German, French or Chinese.

3. A splash window for the CX-Programmer will be displayed, followed by the Setup

Wizard.

Click

the

Next

Button.

4. The

License Agreement

Dialog Box will be displayed.

Read the license agreement completely and if you accept all of the terms, select the

accept the terms of the license agreement

Option and click the

Next

Button.

Summary of Contents for CX-Programmer 9































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-Programmer 9

Reviews:

Related manuals for CX-Programmer 9

Brands by name

Popular brands

Omron CX-Programmer 9, Operation Manual

Search results

Summary of Contents for CX-Programmer 9

Reviews:

Related manuals for CX-Programmer 9

Brands by name

Popular brands