Omron CX-Programmer 9, Operation Manual

Page: 304 / 542

PART 2: CX-Server PLC Tools
CHAPTER 5 – Data Trace/Time Chart Monitor Component OMRON
CX-Server PLC Tools_Page 54
Item Function
[Formula] Select the conditions of Trigger completion.
When [Left Operand] is a bit (data type is BOOL).
↑ Falling Edge
↓
Rising Edge
[Left Operand] is other than the above:
=
Equal
≠ Not equal *1
<
Less than~ *1
> More than~ *1
≤
Maximum *1
≥ Minimum *1
[Trigger
Settings]
[Right Operand] Input the value to be Trigger. Input is enabled when [Left
Operand] is other than a bit (data type is except for BOOL).
[Delay] Input delay value in sample number. Input in slider is possible.
[No. of Trace Samples] When using all trace memory CPU Unit is not necessary, input
sampling number to be traced. Time per trace execution time will
be shorter. *1
[Auto Repeat] Check, Box Check the box when executing trace on auto repeat under the
same conditions.
[No. of Trace Execution] Input the number of trace to be executed repeatedly. When
[Auto Repeat] check box is checked, input is enabled.
[Trace Start on Monitor/Run
Mode] Check Box Start trace automatically at the timing when PLC mode changes
to Monitor mode, or Run Mode (includes Power on).*1
[Trace Start Executing
Automatically After Download]
Check Box Check the box when starting Data Trace automatically after
transferring the execution conditions of Data Trace to PLC.
*1: Settable Only on CJ2 CPU.