Omron CX-Programmer 9 Operation Manual Download Page 76

Page: 76 / 542

OMRON

PART 1: CX-Programmer

CX-Programmer_Page (xliv)

CX-Net (Network Configuration) Functions

•

CX-Net

Menus Changed

Previous version (Ver. 3.0)

New version (Ver. 3.1)

Unit Status

and

Communications

Unit Setup

were on the

PLC

menu.

Operations for Communication units were separated from those for the PLCs and

Unit Status/Error Log

and

Communications Unit Setup

were moved to the

Network

menu.

Both

Setup

and

Edit

appeared

on the

Routing Tables

and

Data

Link

menus.

Setup

and

Edit

were placed together on a

Setup

menu on the

Routing Tables

and

Data Link

menus.

When

Setup

is selected online, the Routing Table or Data Link Component window

is displayed.

When

Setup

is selected offline, a dialog box with the following selections is

displayed before the Routing Table or Data Link Component window is displayed.

Routing tables: FINS Local, FINS Network, or SYSMAC NET

Data links tables: Controller Link, SYSMAC LINK, SYSMAC NET

Exporting Communications Unit Status and Error Log in CSV Format

Previous version (Ver. 3.0)

New version (Ver. 3.1)

Unit status and the error log can

be monitored in a window but

cannot be saved as files. (The

error log data must be read and

then manipulated manually.)

Unit status and error log data for Communications Units (Controller Link Units and

SYSMAC LINK Units) can be written to files in CSV format.

This allows network errors to be analyzed from CSV files.

Displaying Communications Unit Error Logs for C-series PLCs

Previous version (Ver. 3.0)

New version (Ver. 3.1)

For C-series PLCs, the error log

displayed when

PLC

Unit

Status

was selected was the

CPU Unit error log. (A

Communications Unit error log

could not be read or cleared.)

For C-series PLCs, the error log for a Communications Unit (Controller Link Units

and SYSMAC LINK Units) can be displayed and cleared using

PLC

Unit

Status/Error Log

Save As Operation for CX-Net Projects

Previous version (Ver. 3.0)

New version (Ver. 3.1)

An open project could not be

saved under a new file name.

(The file name could be set only

when a new project was created.

Select

Save As

from the Project menu to save a project open in CX-Net under any

desired name.

Summary of Contents for CX-Programmer 9































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-Programmer 9

Reviews:

Related manuals for CX-Programmer 9

Brands by name

Popular brands

Omron CX-Programmer 9, Operation Manual

Search results

Summary of Contents for CX-Programmer 9

Reviews:

Related manuals for CX-Programmer 9

Brands by name

Popular brands