![background image](http://html1.mh-extra.com/html/omega/micromega-cn77000-series/micromega-cn77000-series_user-manual_4057365087.webp)
O
PERATION
:
C
ONFIGURATION
M
ODE
part
3
Command Formats
cont.
RDGCNF.210
= 000 Not Allowed
RDGCNFG.3
= 0 ¡C
RDGCNFG.765
= 000 Filter constant 1
001 Decimal Point 1 (XXXX.)
1 ¡F
001 Filter constant 2
010 Decimal Point 2 (XXX.X)
010 Filter constant 4
011 Decimal Point 3* (XX.XX)
011 Filter constant 8
100 Decimal Point 4* (X.XXX)
100 Filter constant 16
*Process only
101 Filter constant 32
110 Filter constant 64
111 Filter constant 128
Example:
Set Decimal Point 1, ¡C, Filter constant 16. The command data is 10000001Bin = 81Hex. Send *W0881.
Send a Read Command first to determine the proper Decimal Point position (*R08).
Note
☞
79
Summary of Contents for MICROMEGA CN77000 series
