Omega MICROMEGA CN77000 series, User Manual

Page: 41 / 104

O
PERATION
: C
ONFIGURATION
M
ODE
part
3
33
Alarm 1
Display Action Response
Press MENU 1) Press MENU, if necessary, until
" Alar 1 "
prompt appears.
Press ENTER 2) Display advances to
"
Alar.1 enbl
"
or
"
dsbl
"
submenu.
ALARM 1 ENABLE/DISABLE SUBMENU:
Press MAX 3) Display flashes previous selection. Press MAX until
" Enbl "
displays to use Alarm 1.
Press ENTER 4) Display flashes
"
strd
"
message only if it was changed, otherwise press MENU to
advance to
"
Control Type
"
submenu.
CONTROL TYPE SUBMENU:
Press MAX 5) Display flashes previous selection. Press MAX to
"
ABS
o "
or
"
Dev.
"
Press ENTER 6) Display flashes
" strd "
message only if it was changed, otherwise press MENU to
advance to
"
Alarm 1 Latch
"
submenu.
Absolute Mode allows Alarm 1 to function independently from Setpoint 1. If the process being monitored does not change
often, then
"
Absolute
"
Mode is recommended.
Deviation Mode allows changes to Setpoint 1 to be made automatically to Alarm 1. Deviation Mode is typically the ideal mode
if the process temperature changes often. In Deviation Mode, set Alarm 1 a certain number of degrees or counts away from
Setpoint 1 Ñ this relation remains fixed even if Setpoint 1 is changed.
ALR.1
ABSo
ALR.1
ENBL
ALAR
1
Note
☞