43
Préparation pour la première utilisation
Charge du bloc-pile
• Charge du bloc-pile placé dans le chargeur (optionnel)
Placez le bloc-pile dans le chargeur (optionnel) pour le charger.
Le chargeur optionnel fourni pour cette imprimante est spécifique à cette
imprimante .
Ne l’utilisez pas avec d’autre équipement électrique.
➊
Branchez une extrémité du cordon
d’alimentation dans le chargeur,
puis l’autre dans une prise
électrique .
• Une fois la charge terminée, le témoin
CHARGE passe au vert (pour indiquer
que le bloc-pile est chargé à fond).
Prepar
ing f
or First-time Oper
ation
4
13
1
Connect the power cord to the
charger unit, then plug it into the
outlet.
•
When charging is complete, the
CHARGE lamp lights green (fully
charged).
4. Preparing for First-time Operation
Charging the Battery Pack
•
Charging by installing the battery pack in the battery charger (optional)
Install the battery pack in the battery charger (optional) and charge it.
CHARGE
The optional battery charger set provided for this printer is specific to this printer.
Do not use it for other electric equipment.
Charging time
It takes about 1.5 hours for the CHARGE lamp to turn off when charging a completely
depleted battery.
2
Insert the battery pack. Insert the
battery pack into the slot, with
the terminal pointing downward.
•
When charging begins, the
CHARGE lamp (red) lights. When
charging is complete, the CHARGE
lamp lights green (fully charged).
3
Remove the battery pack when
charging is complete.
Reference
14
40
Operation Modes
There are two printer operation modes: continuous printing mode, and dispense
mode printing. Test printing and online printing are available in both modes.
* Use the printer setting tool to set dispense mode printing (non-separated labels).
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
Continuous printing
Dispenser printing
(label paper)
Dispenser printing
(non-separated labels)
Test printing
Continuous printing
Dispenser printing
Online printing
Continuous printing
Dispenser printing
Prints the printer status
(Receives data from a PC or
handheld terminal and prints it)
➊
Insérez le bloc-pile. Insérez le
bloc-pile dans le logement, avec les
bornes de connexion orientées vers
le bas .
• Lorsque la charge débute, le témoin
CHARGE (rouge) s’allume. Une fois la
charge terminée, le témoin CHARGE
passe au vert (pour indiquer que le bloc-
pile est chargé à fond).
Prepar
ing f
or First-time Oper
ation
4
13
1
Connect the power cord to the
charger unit, then plug it into the
outlet.
•
When charging is complete, the
CHARGE lamp lights green (fully
charged).
4. Preparing for First-time Operation
Charging the Battery Pack
•
Charging by installing the battery pack in the battery charger (optional)
Install the battery pack in the battery charger (optional) and charge it.
CHARGE
The optional battery charger set provided for this printer is specific to this printer.
Do not use it for other electric equipment.
Charging time
It takes about 1.5 hours for the CHARGE lamp to turn off when charging a completely
depleted battery.
2
Insert the battery pack. Insert the
battery pack into the slot, with
the terminal pointing downward.
•
When charging begins, the
CHARGE lamp (red) lights. When
charging is complete, the CHARGE
lamp lights green (fully charged).
3
Remove the battery pack when
charging is complete.
Reference
14
40
Operation Modes
There are two printer operation modes: continuous printing mode, and dispense
mode printing. Test printing and online printing are available in both modes.
* Use the printer setting tool to set dispense mode printing (non-separated labels).
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
Continuous printing
Dispenser printing
(label paper)
Dispenser printing
(non-separated labels)
Test printing
Continuous printing
Dispenser printing
Online printing
Continuous printing
Dispenser printing
Prints the printer status
(Receives data from a PC or
handheld terminal and prints it)
➊
Retirez le bloc-pile du chargeur une
fois sa charge terminée .
Temps de charge
Environ 1,5 heure est requise pour charger un bloc-pile complètement déchargé et
que le témoin CHARGE s’éteigne.
