25
Daily Care
Be sure to turn the power off and remove the battery pack before performing
the following operations .
n
Caring for the thermal head
➊
Slide the cover release lever to
open the cover .
When in dispense mode printing, first
slide the dispenser unit to the continuous
printing mode position. (See p. 16)
Prepar
ing f
or First-time Oper
ation
4
17
Loading Labels
The label installation method differs by printing mode.
Continuous printing mode
Label paper
Journal paper
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position.
(See P. 21)
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
➋
Wipe off any smudges with a cloth
dipped in alcohol .
* Do not use thinner, benzene, or kerosene.
Prepar
ing f
or First-time Oper
ation
4
19
Dispense mode printing
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
* Never slide the dispenser unit while
the main cover is open.
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Peel the label at the tip of the
label paper.
Dispense mode printing is not required
for non-separated labels.
Daily Care
13
34
■
Caring for the platen/
dispenser roller/paper sensor
1
Slide the cover release lever to
open the main cover.
When in dispense mode printing, first
slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
2
Wipe off any smudges with a
cloth dipped in alcohol.
* Do not use thinner, benzene, or
kerosene.
Dispenser roller
