Oki LP470s Manual Rapide Download Page 20

Page: 20 / 140

Operation with an RS-232C Cable

To print with an optional RS-232C cable connected to a PC or a handheld
terminal, perform the following operations .

➊

Remove the USB/DIP switch cover,

and set the DIP switch (DSW) to
DSW-1, 2, 3, 4 = (OFF, OFF, OFF,
OFF).

Oper

ation with an RS-232C Cab

Connect the other end of the
RS-232C cable to the connector
on the PC or the handheld
terminal.

For the connector on the PC or the
handheld terminal, see the manuals
provided with that equipment.

Insert the RS-232C cable into
the connector.

Match the arrow on the RS-232C cable

connector with the arrow beside the

printer connector, and insert it firmly.

Remove the RS-232C connector
cover.

7. Operation with an RS-232C Cable

To print with an optional RS-232C cable connected to a PC or a handheld
terminal, perform the following operations.

Remove the USB/DIP switch
cover, and set the DIP switch
(DSW) to DSW-1, 2, 3, 4 = (OFF,
OFF, OFF, OFF).

RS-232C cable

RS-232C cover

Printing

■

When the next label is not printed

12345

ABCDEF

abcdefg

ABC

abcd

FEED button

PRINT button

1234567

ABCDEFG

abcdefg

1234567

ABCDEFG

abcdefg

With the printer online, press the
PRINT button to take the printer
offline (STATUS LED turns off).

Press the FEED button to feed
the labels.

When the paper stops, pull it in

the direction of the arrow to cut

the label.

Press the PRINT button to put
the printer online (STATUS LED
lights green).

➋

Remove the RS-232C connector
cover .

Oper

ation with an RS-232C Cab

Connect the other end of the
RS-232C cable to the connector
on the PC or the handheld
terminal.

For the connector on the PC or the
handheld terminal, see the manuals
provided with that equipment.

Insert the RS-232C cable into
the connector.

Match the arrow on the RS-232C cable

connector with the arrow beside the

printer connector, and insert it firmly.

Remove the RS-232C connector
cover.

7. Operation with an RS-232C Cable

To print with an optional RS-232C cable connected to a PC or a handheld
terminal, perform the following operations.

Remove the USB/DIP switch
cover, and set the DIP switch
(DSW) to DSW-1, 2, 3, 4 = (OFF,
OFF, OFF, OFF).

RS-232C cable

Printing

■

When the next label is not printed

12345

ABCDEF

abcdefg

ABC

abcd

FEED button

PRINT button

1234567

ABCDEFG

abcdefg

1234567

ABCDEFG

abcdefg

With the printer online, press the
PRINT button to take the printer
offline (STATUS LED turns off).

Press the FEED button to feed
the labels.

When the paper stops, pull it in

the direction of the arrow to cut

the label.

Press the PRINT button to put
the printer online (STATUS LED
lights green).

RS-232C cover

RS-232C cable

➌

Insert the RS-232C cable into the

connector .

Match the arrow on the RS-232C cable
connector with the arrow beside the printer
connector, and insert it firmly .

➍

Connect the other end of the RS-

232C cable to the connector on the
PC or the handheld terminal .

For the connector on the PC or the
handheld terminal, see the manuals
provided with that equipment .

Summary of Contents for LP470s













































































































































Search results

Summary of Contents for LP470s

Reviews:

Related manuals for LP470s

Brands by name

Popular brands

Oki LP470s, Manual Rapide

Search results

Summary of Contents for LP470s

Reviews:

Related manuals for LP470s

Brands by name

Popular brands