34
Standard/non-standard code setting mode
Standard code/non-standard code settings for control codes can be changed using the
control code setting command .
Standard/non-standard specifications
Type
Operation
Default
Standard code setting
The following control codes are set as
standard codes .
Control code
Binary
STX
02H
ETX
03H
ESC
1BH
ENQ
05H
CAN
18H
NULL
00H
Standard code
setting
Non-standard code
setting
The following control codes are set as non-
standard codes .
Control code
Binary
STX
7BH({)
ETX
7DH())
ESC
5EH(^)
ENQ
40H(@)
CAN
21H(!)
NULL
7EH(~)
* Non-standard codes can be changed using
the user download setting command .
Change standard/non-standard code setting
The standard code/non-standard code setting is changed by the DIP switch (DSW)
settings when the power is turned on, and by button settings . The settings are enabled
upon turning the power off .
Setting completes
(STATUS LED lights green)
Processing setting
(STATUS LED flashes green)
➊
Non-standard code setting
DSW-1, 2, 3, 4=(ON, ON, OFF, ON) + cover open + PRINT POWER
➋
Standard code setting
DSW-1, 2, 3, 4=(ON, ON, OFF, ON) + cover open + FEED POWER
Note: When the buzzer sound mode is enabled, the buzzer sounds upon startup.
Release the PRINT/FEED button to stop the buzzer.
To check the settings for the standard code/non-standard code setting mode, see
the test print output (See p. 18).
To end standard code/non-standard code setting, confirm that the STATUS LED is
on in green, then turn power off. After changing the standard code/non-standard
code setting mode, be sure to restore the DSW to their original settings.
