31
Head check setting mode
In the head check setting mode, a check can be performed in two checking areas: the
printing area and the barcode printing area .
The presence of the head check function and the head check range settings are set by
the DIP switch (DSW) settings when the power is turned on, by button pressing status,
and by the cover status .
DIP switch settings
DSW-1
DSW-2
DSW-3
DSW-4
(A)
OFF
ON
OFF
ON
(B)
ON
OFF
OFF
ON
DSW
settings
Button and cover status
Function
Default
(A)
PRINT cover
open
Head check range set as
printing area
Head check
range set as
printing area
FEED cover open
Head check function set as
disabled
(B)
PRINT cover
open
Head check range set as
barcode printing area only
FEED cover open
Head check function set as
disabled
Setting head check function
(STATUS LED flashes green)
Setting completes
(STATUS LED lights green)
DSW settings (A/B) + cover open + PRINT/FEED POWER
Note: When the buzzer sound mode is enabled, the buzzer sounds upon startup.
Release the PRINT/FEED button to stop the buzzer. To check the settings for
head check setting mode, see the test print output (See p. 18).
To end head check setting, confirm that the STATUS LED is on in green, then turn
power off. After changing the head check setting mode, be sure to restore the
DSW to their original settings.
