117
Prepar
ing f
or First-time Oper
ation
4
17
Loading Labels
The label installation method differs by printing mode.
Continuous printing mode
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position.
(See P. 21)
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
Impressão no modo de dispensa
(Ver figura na página 26)
Papel de etiquetas
Etiquetas não
separadas
➊
Deslize a alavanca de soltura da
tampa na direção da seta para abrir
a tampa .
Primeiro, deslize a unidade dispensadora
para a posição do modo de impressão
contínua (ver página 16).
* Nunca deslize a unidade dispensadora se
a tampa principal estiver aberta .
Prepar
ing f
or First-time Oper
ation
4
17
Loading Labels
The label installation method differs by printing mode.
Continuous printing mode
Label paper
Journal paper
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position.
(See P. 21)
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
➋
Enquanto pressiona o batente da
guia de etiquetas, deslize a guia
de etiquetas para corresponder ao
tamanho das etiquetas usadas .
Batente da guia de etiquetas
Prepar
ing f
or First-time Oper
ation
4
17
Loading Labels
The label installation method differs by printing mode.
Continuous printing mode
Label paper
Journal paper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position.
(See P. 21)
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
➌
Retire a primeira etiqueta do rolo .
A impressão no modo de dispensa não é
necessária para etiquetas não separadas.
Prepar
ing f
or First-time Oper
ation
4
19
Dispense mode printing
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
* Never slide the dispenser unit while
the main cover is open.
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Peel the label at the tip of the
label paper.
Dispense mode printing is not required
for non-separated labels.
Daily Care
13
34
Platen
Paper sensor
■
Caring for the platen/
dispenser roller/paper sensor
Dispenser roller
1
Slide the cover release lever to
open the main cover.
When in dispense mode printing, first
slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
2
Wipe off any smudges with a
cloth dipped in alcohol.
* Do not use thinner, benzene, or
kerosene.
