33
Buzzer sound mode setting
A buzzer can be sounded upon starting up the printer and upon errors. The buzzer
is enabled by default . This can be enabled or disabled by the initial operation and by
online command .
Change buzzer sound setting
Setting completes
(STATUS LED lights green)
Processing setting
(STATUS LED flashes green)
➊
Disable buzzer sound
DSW-1,2,3,4=(OFF, OFF, ON, ON) + cover open + PRINT POWER
➋
Enable buzzer sound
DSW-1,2,3, 4=(OFF, OFF, ON, ON) + cover open + FEED POWER
Note: When the buzzer sound mode is enabled, the buzzer sounds upon startup.
Release the PRINT/FEED button to stop the buzzer. To check the settings for the
buzzer sound setting mode, see the test print output (See p. 18).
To end buzzer sound setting, confirm that the STATUS LED is on in green, then
turn the power off. After changing the buzzer sound setting mode, be sure to
restore the DSW to their original settings.
