128
n
Como cuidar do cilindro/rolete dispensador/sensor do papel
➊
Deslize a alavanca de soltura da
tampa para abrir a tampa principal .
Ao imprimir no modo de dispensa, primeiro
coloque a unidade dispensadora na
posição do modo de impressão contínua
(ver página 16).
Prepar
ing f
or First-time Oper
ation
4
17
Loading Labels
The label installation method differs by printing mode.
Continuous printing mode
Label paper
Journal paper
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position.
(See P. 21)
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
➋
Remova todos os acúmulos de
sujeira com um pano umedecido
com álcool.
* Não use tíner, benzeno nem querosene.
Prepar
ing f
or First-time Oper
ation
4
19
Dispense mode printing
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
* Never slide the dispenser unit while
the main cover is open.
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Peel the label at the tip of the
label paper.
Dispense mode printing is not required
for non-separated labels.
Daily Care
13
34
■
Caring for the platen/
dispenser roller/paper sensor
Dispenser roller
1
Slide the cover release lever to
open the main cover.
When in dispense mode printing, first
slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
2
Wipe off any smudges with a
cloth dipped in alcohol.
* Do not use thinner, benzene, or
kerosene.
Sensor do papel
Cilindro
Prepar
ing f
or First-time Oper
ation
4
19
Dispense mode printing
(See figure on P. 40)
Label guide stopper
1
Slide the cover release lever in
the arrow direction to open the
cover.
First, slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
* Never slide the dispenser unit while
the main cover is open.
2
While pressing the label guide
stopper, slide the label guide to
the label size to be used.
3
Peel the label at the tip of the
label paper.
Dispense mode printing is not required
for non-separated labels.
Daily Care
13
34
■
Caring for the platen/
dispenser roller/paper sensor
1
Slide the cover release lever to
open the main cover.
When in dispense mode printing, first
slide the dispenser unit to the
continuous printing mode position. (See
P. 21)
2
Wipe off any smudges with a
cloth dipped in alcohol.
* Do not use thinner, benzene, or
kerosene.
Rolete dispensador
