Oce TCS300 User Manual Download Page 22

Page: 22 / 190

Chapter 2 Get to know the Océ TCS300 colour printing system hardware

The Océ TCS300 printer

The main components of the Océ TCS300 printer

[8]

Note:

The copy receiving rack is an optional feature. The copy receiving rack is

required for the 3 roll version (

see ‘The optional copy receiving rack’ on page 30

Number

Component

Function

The printer operator panel

View the printer information.

The top cover

Get access to the carriage with
the printheads.

The media rolls

Provide the media for your
printed output.

The integrated receiving tray

Receive the output (option).

The ink tanks

Provide the ink for your printed
output.

The Océ Power Logic

controller door

Get acces to the optionally
integrated Océ Power Logic

controller.

The maintenance door

Get access to the maintenance
cassette.

Summary of Contents for TCS300































































































































































































Search results

Summary of Contents for TCS300

Reviews:

Related manuals for TCS300

Brands by name

Popular brands

Oce TCS300, User Manual

Search results

Summary of Contents for TCS300

Reviews:

Related manuals for TCS300

Brands by name

Popular brands