Oce TCS300, User Manual

Page: 118 / 190

118 Chapter 6 Ensure the best output quality
Use the Optimise print quality wizard
Use the Optimise print quality wizard
Introduction
The off-line screen of the printer operator panel contains the 'Optimise print quality'
wizard that helps you to correct the problems with the output quality. The wizard
performs the following actions.
■
Detect weak or failing nozzles.
The Océ TCS300 automatically compensates the detected nozzles in future prints
to make sure that print quality is optimal.
■
Align the printheads and optimise the paper transport.
During the 'Optimise print quality' wizard, the system performs an alignment. The
alignment requires the use of media. Make sure at least one roll of the defined media
(
see ‘Set up unattended / overnight printing optimisation’ on page 67 ) is loaded
before you enter the 'Optimise print quality' wizard.
Note: You can start the 'Optimise print quality' wizard from the printer operator
panel or you can automatically optimise your print quality after a defined number of
prints if you set 'Overnight printing optimisation' in the Océ Settings Editor to
'On'(
see ‘Set up unattended / overnight printing optimisation’ on page 67 ).
When to do
Before you start the 'Optimise print quality' wizard, first check the following.
■
Did you use the correct media type?
■
Did you use the correct print mode?
Only start the wizard when you are sure that you used the correct media type and the
correct print mode, and the output quality is still not satisfactory.
How to use the Optimise print quality wizard
1.
Press the on-line / off-line key to set the printer off-line.
2.
Press the upper softkeys to scroll to the 'Optimise print quality' card.
[65]
3.
Press the lower softkey for 'Optimise print quality' to enter the wizard.