Oce TCS300, User Manual

Page: 70 / 190

70 Chapter 5 Print jobs to the Océ TCS300
What you need to know before you send your print jobs
What you need to know before you send your print jobs
Definition
Before you send print jobs to the Océ TCS300, remember the following.
■
The values defined in the Océ Settings Editor are default values for the general
system behaviour. You can define a number of job settings in the printer drivers
or the job submission tools. The settings defined in the printer drivers or the job
submission tools always overrule the settings defined in the Océ Settings Editor.
■
Make sure that you define the correct quality mode for your job ( see ‘The quality
modes’ on page 83 ).
■
Make sure that you define the correct media type for your job ( see
‘Recommended media types and quality modes’ on page 85 ).
■
Make sure that you define the correct job settings. For example, orientation,
rotation, and media type.
Note: When the requested media type is not available on the printer, the printer will
give a media request. Depending on the 'Media request time-out' settings in the Océ
Settings Editor ((
see ‘Configure the 'Media request time-out'’ on page 63 )), the
printer waits until the media is loaded or the print job will be deleted after the
time-out has expired.