Oce TCS300, User Manual

Page: 134 / 190

134 Chapter 8 Maintain the Océ TCS300 printer
Replace the media
[72]
[72] Remove the flanges
How to load a new media roll
1.
Insert the flanges in both ends of the new media roll.
2.
Press the handles down to fasten the flanges.
3.
Put the saddles into position at the ends of the track.
[73]
[73] Saddles
4.
Use both hands to place both flanges in the green saddles on the printer.
5.
Use both hands to slide the medium under the paper guide. Place the media on the
printer as shown in the figure below.